SIZE: For use with any 1/4″ Inch tubing size – 4 to 7 mm (Can also be punched into 1/2 drip tubing).
PREVENT LEAKS & BLOWOUTS: These emitters are designed with an operating pressure: up to 25 PSI. If your system is over that number blowouts and poor performance will occur.
DESIGN: Barb design ensures tubing will not slip out or blow off at high pressure and temperature NOTE: THE MAXIMUM RECOMMENDED AMOUNT OF FITTINGS PER ZONE AT 25PSI IS QTY.22 IF YOU EXCEED THIS AMOUNT YOU MAY HAVE INSUFFICIENT WATER PRESSURE.
ECO FRIENDLY: Provide water directly where you need it without any overspray!
EASY TO INSTALL: Install emitters directly into the 1/2 main line or branch off with 1/4 inch tubing and connect fittings to the ends! INCLUDES CONNECTORS!
